Product Introduction
The HANLEI High-Speed Rack-and-Pinion Automatic Feeding Laser Cutting Machine is an industrial laser cutting solution developed for large-volume processing of flexible roll materials.
The machine adopts a dual-track, dual-beam structure with four independently controlled laser cutting heads. Its high-speed transmission system combines servo motors, precision gear reducers, and precision-ground rack-and-pinion drives to provide stable motion and accurate positioning during high-speed operation.
Unlike conventional belt-driven laser cutting machines, the rack-and-pinion transmission system is designed to reduce belt stretching and slipping, helping maintain consistent motion performance during long production runs.
The four laser heads support both synchronized and asynchronous cutting modes. In synchronized mode, all four heads can process the same pattern simultaneously. In asynchronous mode, the front and rear beams operate independently, allowing different patterns to be cut at the same time. An intelligent collision prevention system helps avoid interference between cutting heads during mixed-layout production.
Equipped with an automatic wear-resistant mesh-belt feeding platform, the machine supports continuous feeding and unloading of roll materials, reducing manual material handling and repeated positioning.
With a maximum rapid traverse speed of 1,200 mm/s, the HANLEI rack-and-pinion laser cutting machine is designed for high-efficiency, continuous production in garment, home textile, leather goods, footwear, and other flexible-material industries.
Key Features
1. High-Speed Precision Rack-and-Pinion Transmission
Precision gear-and-rack transmission system.
Servo motor drive with precision gear reducers.
Designed for high-speed, stable motion.
Reduces belt stretching and slipping associated with conventional belt-driven systems.
Helps maintain positioning consistency during extended operation.
Compared with conventional belt-driven models, the rack-and-pinion transmission configuration is designed to increase operating speed by approximately 50% under comparable conditions.
2. Dual-Beam Four-Head Asynchronous Cutting System
Two independent X/Y motion beams.
Four independently controlled CO₂ laser cutting heads.
Supports synchronized and asynchronous cutting modes.
Intelligent collision prevention and head-avoidance algorithms.
Suitable for mixed-size patterns and multi-layout production.
Synchronized Mode:
All four laser heads process the same pattern simultaneously, improving batch cutting efficiency.
Asynchronous Mode:
The front and rear beams operate independently and can process different patterns simultaneously, improving machine utilization and production flexibility.
Compared with conventional dual-head configurations, the four-head system is designed to increase production capacity by more than 80% under suitable processing conditions.
3. Automatic Mesh-Belt Feeding System
High-density, wear-resistant, anti-slip mesh conveyor belt.
Front and rear material pressing and supporting mechanisms.
Automatic roll-material feeding and continuous unloading.
Supports long-duration, continuous cutting operations.
Reduces repeated manual spreading and material positioning.
Suitable for large-format printed fabrics and flexible roll materials.
The automatic feeding platform helps streamline production workflows and reduce labor requirements. One operator may be able to monitor multiple machines, depending on the production layout and material-handling requirements.
4. High-Speed Processing Performance
Maximum rapid traverse speed: 1,200 mm/s.
Precision rack-and-pinion drive for high-speed movement.
Servo motor and gear reducer transmission.
Designed for high-volume industrial production.
Suitable for factories handling large and time-sensitive orders.
The stated 1,200 mm/s speed refers to rapid traverse without cutting. Actual cutting speed depends on material type, thickness, pattern complexity, laser power, and processing settings.
Technical Specifications
| Item | Specification |
|---|---|
| Laser Type | CO₂ Glass Laser Tube |
| Laser Wavelength | 10,600 nm |
| Laser Power | 100W / 120W / 150W / 180W (Optional) |
| Working Area | 1810 / 1812 / 1816 / 1822 / 1922 / 2030 (Optional, Customizable) |
| Machine Structure | Precision High-Speed Rack-and-Pinion Assembly |
| Motion Structure | Dual-Track, Dual-Beam System |
| Laser Heads | Four Independent Laser Cutting Heads |
| Transmission System | Precision Rack and Pinion |
| Drive System | Servo Motors with Precision Gear Reducers |
| Maximum Rapid Traverse Speed | 1,200 mm/s |
| Working Mode | Positioning Cutting |
| Cutting Accuracy | ±0.01 mm |
| Repeat Positioning Accuracy | ±0.005 mm |
| Minimum Line Width | ≤0.02 mm |
| Feeding System | Automatic Mesh-Belt Conveyor |
| Cooling Method | Water Cooling |
| Control System | Industrial Motion Control System |
| Supported File Formats | DXF, AI, PLT, GERBER (Compatibility Subject to Software Configuration) |
| Power Supply | AC 220V, 50Hz |
| Rated Power | 2,500W |
Processing Materials
Flexible Textile Materials
Polyester, chiffon, knitted fabric, sportswear fabric, quick-drying fabric, swimwear fabric, denim, cotton, linen, non-woven fabric, felt, curtain fabric, sofa fabric, lace, embroidered fabric, digital heat-transfer printed fabric, reflective fabric, flag fabric, and Oxford cloth.
Leather Materials
PU synthetic leather, microfiber leather, genuine leather, luggage leather, footwear leather, and sofa leather.
Foam and Garment Accessories
EVA foam, sponge, felt pads, adhesive-backed foam, non-woven fabric pads, hook-and-loop fasteners, webbing, and garment labels.
Applications
Sportswear and Apparel
Sports jerseys and team uniforms
Cycling apparel
Yoga wear
Swimwear
Digital printed sportswear panels
Batch contour cutting of printed fabrics
Footwear and Luggage
Knitted shoe uppers
Printed luggage panels
Leather accessories
Reflective shoe labels
Footwear material cutting
Home Textiles and Upholstery
Curtains and drapes
Cushion covers
Sofa covers
Carpet materials
Plush toy fabrics
Advertising and Flags
Heat-transfer printed flags
Advertising banners
Satin advertising fabrics
Tablecloths
Large-format textile graphics
Gifts, Crafts, and Toys
Plush toys
Embroidered patches
Felt crafts
Fabric decorations
Customized textile products
Automotive Interiors
Car seat covers
Floor mats
Interior leather components
Sound-insulation felt materials
Garment Accessories
Woven garment labels
Shoulder patches
Embroidered badges
Reflective strips
Automatic contour cutting of garment accessories
Why Choose HANLEI?
Precision Rack-and-Pinion Drive: Designed for stable high-speed transmission and reduced belt-related stretching and slipping.
Four-Head Productivity: Dual-beam asynchronous operation supports simultaneous processing of different patterns.
Automatic Roll Feeding: Continuous mesh-belt feeding reduces manual handling and production interruptions.
High-Speed Movement: Maximum rapid traverse speed of 1,200 mm/s.
Intelligent Collision Prevention: Helps coordinate four cutting heads and reduce the risk of mechanical interference.
Industrial Production Design: Suitable for high-volume textile, leather, footwear, and flexible-material manufacturing.
HANLEI provides high-speed industrial CO₂ laser cutting solutions for manufacturers seeking higher throughput, stable transmission, and automated roll-material processing.