Success Case

ABS Injection Molded Part Gate and Flash Trimming Laser Cutting Machine

The HANLEI ABS Injection Gate and Flash Trimming Laser Cutting Machine is designed for precision trimming of injection-molded plastic components. It helps remove excess gate material, sprues, burrs, and unwanted edges from molded parts, separating the finished component from excess material. The system is suitable for plastic component processing where clean edges, consistent trimming, and reduced manual finishing are required.

ABS Injection Molded Part Gate and Flash Trimming Laser Cutting Machine

Project Details

Product Introduction

The HANLEI ABS Injection Gate and Flash Trimming Laser Cutting Machine is designed for precision processing of plastic injection-molded components.

During injection molding, excess material may remain around the gate, sprue, and parting line. These unwanted sections often require additional trimming and finishing before the molded component can be used or assembled.

This machine uses a laser cutting process to remove designated excess material from plastic components, including injection gates, burrs, and unwanted edge sections. It helps separate the molded product from the remaining gate material while improving trimming consistency and reducing the need for manual cutting.

The equipment can be configured according to component geometry, trimming positions, material characteristics, and production requirements.

Key Features

1. Injection Gate Trimming

Designed to remove excess injection gate material from ABS molded components, helping separate the finished product from the gate section.

2. Sprue and Excess Material Removal

Supports precision trimming of sprues and unwanted plastic sections according to the component design and processing path.

3. Burr and Flash Edge Processing

Can be configured to process suitable plastic flash and excess edge material, helping improve the appearance and consistency of molded parts.

4. Non-Contact Laser Processing

Laser processing does not require a mechanical cutting blade to contact the workpiece, helping reduce mechanical pressure and deformation during trimming.

5. Customized Cutting Paths

Cutting paths can be configured according to the shape, size, and trimming requirements of different injection-molded components.

6. Consistent Processing Quality

Controlled laser processing helps maintain repeatable trimming positions and supports consistent production quality when the workpiece positioning and process parameters are properly configured.

Working Principle

The injection-molded plastic component is positioned in the processing area according to the required trimming location.

The laser system follows a predefined cutting path to process the designated gate, sprue, burr, or excess edge sections. The laser energy locally melts or removes the targeted plastic material, helping separate unwanted sections from the finished component.

The processing parameters, including laser power, speed, focus position, and cutting path, are adjusted according to the plastic material, thickness, and component structure.

Processing Materials

  • ABS injection-molded components

  • Suitable thermoplastic molded parts

  • Plastic housings and enclosures

  • Injection-molded connectors

  • Plastic electronic components

  • Automotive plastic components

  • Plastic accessories and industrial parts

Material compatibility must be verified through sample testing before production.

Applications

  • ABS injection gate removal

  • Injection-molded sprue trimming

  • Plastic burr and flash removal

  • Molded component edge trimming

  • Plastic housing finishing

  • Electronic plastic component processing

  • Automotive plastic part finishing

  • Customized injection molding post-processing

Custom Workholding Fixture

The machine is equipped with a customized workholding fixture designed according to the shape and dimensions of the injection-molded components.

The fixture securely positions and supports each workpiece during laser processing, helping prevent movement or displacement and ensuring consistent alignment between the component and the laser cutting path.

Key Fixture Features:

  • Customized Positioning: Fixture designed to match the shape and structure of specific ABS molded parts.

  • Stable Workpiece Fixing: Holds the component securely during gate and sprue trimming.

  • Repeatable Positioning: Helps maintain consistent processing positions for batch production.

  • Precise Cutting Alignment: Ensures the laser cutting path matches the designated gate and trimming locations.

  • Replaceable Fixture Design: Can be customized for different product models and component specifications.

Workpiece Loading and Processing

  1. Place the ABS injection-molded component into the customized fixture.

  2. Position and secure the workpiece according to the fixture structure.

  3. Execute the preset laser trimming program.

  4. Remove the finished component after gate, sprue, or excess material separation.

Custom Workholding Fixture

The machine is equipped with a customized workholding fixture designed according to the shape and dimensions of the injection-molded components.

The fixture securely positions and supports each workpiece during laser processing, helping prevent movement or displacement and ensuring consistent alignment between the component and the laser cutting path.

Key Fixture Features:

  • Customized Positioning: Fixture designed to match the shape and structure of specific ABS molded parts.

  • Stable Workpiece Fixing: Holds the component securely during gate and sprue trimming.

  • Repeatable Positioning: Helps maintain consistent processing positions for batch production.

  • Precise Cutting Alignment: Ensures the laser cutting path matches the designated gate and trimming locations.

  • Replaceable Fixture Design: Can be customized for different product models and component specifications.

Workpiece Loading and Processing

  1. Place the ABS injection-molded component into the customized fixture.

  2. Position and secure the workpiece according to the fixture structure.

  3. Execute the preset laser trimming program.

  4. Remove the finished component after gate, sprue, or excess material separation.

Custom Workholding Fixture

The machine is equipped with a customized workholding fixture designed according to the shape and dimensions of the injection-molded components.

The fixture securely positions and supports each workpiece during laser processing, helping prevent movement or displacement and ensuring consistent alignment between the component and the laser cutting path.

Key Fixture Features:

  • Customized Positioning: Fixture designed to match the shape and structure of specific ABS molded parts.

  • Stable Workpiece Fixing: Holds the component securely during gate and sprue trimming.

  • Repeatable Positioning: Helps maintain consistent processing positions for batch production.

  • Precise Cutting Alignment: Ensures the laser cutting path matches the designated gate and trimming locations.

  • Replaceable Fixture Design: Can be customized for different product models and component specifications.

Workpiece Loading and Processing

  1. Place the ABS injection-molded component into the customized fixture.

  2. Position and secure the workpiece according to the fixture structure.

  3. Execute the preset laser trimming program.

  4. Remove the finished component after gate, sprue, or excess material separation.

Customized Automation Solutions

HANLEI can customize dedicated fixtures according to product drawings, 3D models, sample components, and trimming requirements. Fixture configurations can be developed for single-piece processing or multi-position batch processing.

Why Choose HANLEI?

HANLEI provides laser processing solutions for industrial plastic component manufacturing.

Our laser trimming equipment can be configured for different injection-molded part geometries and gate removal requirements. By integrating controlled laser processing with customized positioning and cutting paths, manufacturers can reduce manual trimming operations and improve processing consistency.

We support customized equipment solutions based on material type, component dimensions, gate structure, and production requirements.


About This Case

2026-11-15


If you are interested in this solution or have similar needs, please contact our expert team.

Request Quote
Back to All Cases