CO₂ Laser Tube and Laser Power Supply Compatibility Requirements

CO₂ Laser Tube and Laser Power Supply Compatibility Requirements

The laser power supply is an essential component for ensuring the proper operation of CO₂ laser tubes (hereinafter referred to as "laser tubes").

Different laser power supply manufacturers use different model numbers and naming conventions. To reduce compatibility issues between laser tubes and laser power supplies, this guide specifies the recommended power supply models for HANLEI laser tubes and products from major domestic laser power supply manufacturers in China.

1. Recommended Laser Power Supply Configurations

The following table lists the recommended laser power supply models for different laser tube specifications.

No.

Laser Tube Models

Recommended Power Rating

Shandong Lezhiyuan / Jinan Hongyuan

Dongguan Jinxing

Jinan Mingyu / Jinan Zhenyu

Shandong Zhaori

1

1250T7, 1300T72, 1600P6

80W

HY-T100

M

MYJG-100W

ZR80/100W

2

1400T7, 1600S6, 1600S7

120W

HY-W120

XXL / XL

MYJG-130W

ZR-130W

3

1600F7, 1700H7, 1800W7 (C6, C7, C8)

150W / 180W

HY-T150 / HY-W150

L

MYJG-150W / MYJG-180W

ZR-150W / ZR-180W

4

1800U7, 2000K7 (C9, C20)

200W

HY-W200

1+L

MYJG-200W

ZR-200W

Note: The model numbers and power ratings listed above are recommended configurations. Actual compatibility should be confirmed with the corresponding power supply manufacturer.

2. Special Configuration Recommendations

When selecting a laser power supply, several factors should be considered, including unstable external power supply voltage, high-voltage protection requirements, and high-voltage cable length.

Taking these factors into account, the following additional recommendations apply:

- 1600F7, 1700H7, and 1800W7: These laser tube models can be configured with a 150W regulated laser power supply or a higher-capacity 180W laser power supply.

- 1400T7 and 1600S7: To allow future upgrades to 1600F7, 1700H7, or 1800W7 without replacing the laser power supply, these models can also be configured with a 150W laser power supply in advance.

When using a 150W laser power supply with the 1400T7 or 1600S7 laser tube, the operating current must not exceed 30 mA. Under this operating condition, the larger-capacity power supply will not negatively affect the service life of the laser tube.

Important: Always ensure that the laser power supply output current and voltage are compatible with the laser tube specifications. Proper high-voltage insulation, cable installation, grounding, and current adjustment are essential for safe and stable operation.

Recommended

View all articles
CO₂ Laser Tube Operation Manual

CO₂ Laser Tube Operation Manual

The HANLEI CO₂ Laser Tube Operation Manual provides essential instructions for the installation, operation, and maintenance of CO₂ laser tubes. It covers electrical connections, high-voltage protection, cooling system requirements, operating current settings, safety precautions, routine maintenance, and common troubleshooting procedures.